BAYVIEW Bay Window 

The Bayview is exactly what the name says ­­ a bay window developed for travel trailers, fifth wheels and motorhomes that folds out for use and retracts for travel. When the RV is parked at a campground, the bay window opens giving a larger, more roomy sense to the unit. When it's time to hit the road, the window folds up to a flat, fixed, out-of-the way position so that it is aerodynamically efficient.

When opened, it is completely sealed against water and air filtration. The roof of the bay window is designed as an overhang, further protecting against water infiltration. The window is manufactured with 12 extruded pieces and 9 pieces of tempered glass that is strong enough to more than bear the weight of flower pots and other knickknacks people might like to place in a bay window.

Another important aspect is the ease with which the window opens. Two locking bars slide to the center and the window opens with a gentle push. It's a one-handed operation.

The window unit is installed with a conventional clamp ring system, so it can be used on different wall thicknesses. It is being manufactured to fill a standard 60 by 30 inch opening but can be made to any size.

Presently, the window is available in black, but a white framed unit should be available this month. The Bayview is in production for towables, and a motorhome model is expected to be ready in the very near future.

You can see the Bayview bay window at the Duncan Systems booth and at the Starcraft RV exhibit at the Louisville show.

For additional information contact R. J. Sampers Inc., 25120 Leer Dr., Elkhart, IN 46515. 219-2662-0449.

RealWheels Unique Cut-Out Patterns
Simulate Aluminum Wheels!

RealWheels Cover Company, an American manufacturer, has introduced a new line of stainless steel front and rear wheel simulators in sizes from 16" to 24.5." Available in four different cut-out patterns, these simulators are designed to simulate the look of aluminum wheels. They are engineered to fit snugly to steel disc front wheels with a patented Hook Mount, over-the-lug mounting system. This system does not disturb the torque of the lug nuts. These simulators are wheel manufacturer approved and D.O.T. user-friendly. All are made from high-quality, non-magnetic 304L stainless steel that will not rust, pit, corrode or turn yellow. Pre-mounted lug nut covers and rear high hats come standard. Each comes with a life-time mirror-shine finish guarantee and a 2-year rebuffing warranty.

For more information and a 20 page, full-color catalog, contact: RealWheels Cover Company, Inc., 3940 Tannahill Drive, Gurnee, IL 60031. Phone 847-662-7722. fax 847-662-7744.

RoadVac
Built-in Vacuum Power - For the Road

With its housing just 7-3/4" wide, 15-3/4" high and 3-7/8" deep, the RoadVac fits in the smallest space and is easy to install. Just three wires to connect to 120 volt AC power (existing receptacle or separate circuit breaker) and you're done.

The RoadVac housing is constructed of powder-coated steel. The front panel and internal parts are high-tech PolyCarbonate/ABS. Equipped with a powerful 11-amp motor, its unique ribbed vacuum chamber and triple filtration system maximizes airflow and creates a suction that exceeds most household vacuum cleaners. The powerful motor compacts the dirt in the dust bag so the bag lasts twice as long. The RoadVac stretch hose extends form six feet to thirty feet, and wraps around the surface-mounted RoadVac for convenient and easy storage. RoadVac can also be flush mounted in a wall, cabinet or closet. It features an adjustable wand which will help eliminate lower back pain that often accompanies vacuuming. A full line of accessory tools are available to make all your vacuuming chores easier. The unit is available in biscuit or white, with a shipping weight of only 12 pounds, and has a 2 year normal use warranty.

Want to know more? Contact InterVac Design Corp., 1312 Commerce Lane, 14-B, Jupiter, FL 33458. Phone 561-743-1925, fax 561-743-2544.